• Add to cart Quick View

    Plastic Foot Pack

    $185.33

    Foot holds are the unsung heroes of every great climb. This selection of 13 footholds from the TB2 are sure to elevate your home wall or spray wall experience. The intentional designs and relatively small hold footprints allow you to maximize hold density and versatility on your wall.

    Pack Contents:

    2x: 6s- A rounded smear foot. The shape makes it very difficult to pull with the feet, making it most suitable as a push-foot. 

    2x: 35L + 35R- A directional, incut foot. Great for movements that emphasize pulling with the feet. Extremely versatile. 

    4x: 7s- An incut edge. Less subtle and easy to engage from most directions.

    3x: 8s- 2 sided slopey foot. A nuanced shape that emphasizes articulation of the foot to engage the textured dishes.

    *Hardware not included

  • Posters

    $20.00

    22″x 28″ poster. Premium semi-gloss finish.

    Climbing is always a good time, but it’s not always fun. This is a visual reminder of that notion.

  • Add to cart Quick View

    Power Strips (Pair)

    $17.60

    When Coach Nate Drolet approached us about a gap in today’s campus boards, we agreed that something was missing. We teamed up with our friends over at Power Company Climbing to create the Power Strips.

    Sold as a pair and designed with both 10mm and 15mm edges, the Power Strips are wide enough to be an easy target, but compact enough to fit onto a busy campus board. The split design means you can get your thumb in on the training (if you choose to) and gives you the ability to place the strips at a width that suits your needs. And whenever you’re ready to change up the edge size, simply invert and reinstall the holds.

    From advanced contact strength to foot-on endurance training, the Power Strips are the next logical step in your campus board training.

    Product Specs:

    10mm and 15mm rounded wooden edges

    5 inches x 2 inches

    Metal screw inserts and hardware included.

  • Ray Tee

    $25.00$31.45
    Digital Abstract Series
    Regular Fit
    5.3 oz Mid Weight Tee
    100% Combed Organic Cotton
    Designed and Screen Printed in Colorado
  • Roots Sweatshirt

    $70.00
    Oversize Fit
    10 oz Heavyweight Poly/Cotton Blend
    Designed and Screen Printed in Colorado
  • Shoe Spray

    $4.99$22.00

    This unique combination of natural cleaning, conditioning, and drying agents is specifically formulated to increase shoe rubber performance while protecting the rock from the polishing effect of dirty shoes.

    It revives the friction of your shoe’s rubber, allowing you to stick better to volumes and footholds. And no… it’s not just rubbing alcohol.

    Clean

    The Shoe Spray is a non-toxic, biodegradable, plant based climbing shoe cleaner. This unique solution is formulated to clean and restore climbing shoe rubber to its original tacky feel. Over time rubber becomes stiff and slick due to exposure to oxygen. The Shoe Spray is specially formulated to perform three key functions. First, the solution removes dirt and chalk leaving the shoe rubber free of debris. Second, the spray deoxidizes the rubber which restores it to its original performance. Finally, the conditioning agent protects the rubber and helps maintain its friction by slowing oxidation.

    Protect

    Small particles of dirt on your shoes act like sandpaper and can contribute to holds becoming polished. By removing dirt and other small particles you are helping prolong the life of the rock. While some amount of polishing is inevitable due to climbing, with clean shoes we can help reduce our impact on the rock. Shoe cleaning is one small change that can have a huge impact over the course of a lifetime of climbing.

    Send

    Once your shoes are completely dry you can enjoy their enhanced performance.  The alcohol in our solution acts as a drying agent to help your shoes dry fast so you can get back to climbing. We have found our spray to be incredibly useful for all types of climbing, but especially with volumes in gyms, climbing in cold weather, and on polished feet.

    Directions

    1. Apply 2-3 sprays of Tension Climbing Shoe Spray to the climbing shoe rubber.
    2. Wait 10-20 seconds to allow the solution to deoxidize the rubber.
    3. Wipe off the remaining solution with a lint free cloth and allow rubber to air dry completely before climbing.
    4. Enjoy increased shoe rubber performance!

     

  • Add to cart Quick View

    Small Plastic Pack A

    $168.78

    This set of 10 demanding incut crimps and flat edges selected from the TB2 are the perfect addition to any home wall or spray wall. These small, utilitarian holds provide a wide range of possibilities while the relatively small hold footprints, allow you to maximize hold density and versatility on your wall. 

    Pack Contents:

    2x: 11L + 11R- Narrow incut flap. A generous 3 finger incut that can also accommodate 4 fingers. The tighter edge radius makes this hold especially useful as a sidepull or undercling. 

    2x: 49L + 49R- Quarter pad incut crimp. Great for full-crimping and pulling into the wall. Tastefully dual-texed with a textured portion for thumb utilization and smearing. 

    36L + 36R- Small flat edge. Very demanding. Emphasizes body tension, control, and thumb engagement.

  • Small Plastic Pack B

    $192.50

    This set of 12 crimps and edges selected from the TB2 are the perfect addition to any home wall or spray wall. These smaller, utilitarian holds provide a wide range of possibilities with a relatively small footprint, allowing you to maximize hold density on your wall.  

    Pack Contents:

    2x: 21L + 21R- Half pad incut crimp. The comfortable radius and irregular gripping surface slightly emphasizes either the front-two or back-two fingers depending on the grip orientation. A great hold for crimp work at all angles.

    2x: 5s- Small incut knob. A super comfortable hold that can be pinched, crimped, or held open handed, while being approachable from multiple angles. Extremely versatile at all wall angles.

    44L + 44R- Full pad incut crimp. The raised sides of the grip emphasize accuracy.

    36L + 36R- Small flat edge. Very demanding. Emphasizes body tension, control, and thumb engagement.

    70s- Quarter pad crimp. As comfortable as a crimp this small can be. The lip sits away from the wall, making it possible to latch the hold open handed before curling into a crimp position.

    72s- Half pad edge. The slightly concave surface emphasizes accuracy and makes the hold versatile at more angles than a typical flat edge.

  • Smoke Tee

    $25.00$31.45
    Digital Abstract Series
    Regular Fit
    5.3 oz Mid Weight Tee
    100% Combed Organic Cotton
    Designed and Screen Printed in Colorado
  • Stone Tee

    $25.00$31.45
    Digital Abstract Series
    Regular Fit
    5.3 oz Mid Weight Tee
    100% Combed Organic Cotton
    Designed and Screen Printed in Colorado
  • Tape

    $13.20$17.60

    Our new high-performance tape is available in a Tri-Pack which includes a .3″, .5″, and 1″ roll! The 1″ roll is great for wrists, ankles, tape gloves, or tearing down to specific widths; the .5″ roll works best for larger blisters, and the .3″ rolls are pre-cut to fit perfectly on your finger tips. The tape adhesive is incredibly sticky and works great even in cold temperatures. It’s perfect for both gym and outdoor use.

    New- Due to the popularity of our tape, we have two new pack options! The tape is now available in .3″ (3-pack) and .5″ (2-pack).

     

  • -8% Select options Quick View

    Tension Board 2

    $1,811.59$12,204.12

    The Next Evolution – Years in the Making

    The Tension Board 2 was developed from the ground up to be the singular most effective systemized training board. Built on a foundation of versatility – we combined the symmetrical DNA of the TB1 with the functionality of a traditional spray wall, resulting in the optimal climbing and training experience.

    For more information, click HERE. For frequently asked questions, click HERE.

    The sets below do not include a wall or panels. You can check out the Kumiki Everactive wall HERE. Or, you can check out our FAQ page for wall builders in your area.

    Please note that there is a 3% processing fee that is non-refundable.

    Hardware sold separately.

    Please allow 7-10 weeks for your order to process and ship. If you have any questions, please email info@tensionclimbing.com.

Shopping Cart

Filter by categories